ST300 Endmills for high performance machining of titanium alloys
Suitable for high performance processing of titanium alloys.
The new titanium alloy milling grade is adopted, which has significant improvement in wear resistance and bond resistance.
Special corner radius treatment, improve the cutting edge strength and sharpness, effectively reduce the vibration caused by corner radius.
The use of enhanced large helix angle design and unequal tooth pitch can reduce the harmonics produced by cutting, and eliminate bad chatter.
A professional 5-edge design has been added, designed to exceed the productivity of 4-edge endmills.
 |
 |
 |
 |
- Feature
- Application
- Application case
ST300 Endmills for High Performance Machining of Titanium Alloys
Product features
♦ Suitable for high performance processing of titanium alloys.
♦ The new titanium alloy milling grade is adopted, which has significant improvement in wear resistance and bond resistance.
♦ Special corner radius treatment, improve the cutting edge strength and sharpness, effectively reduce the vibration caused by corner radius.
♦ The use of enhanced large helix angle design and unequal tooth pitch can reduce the harmonics produced by cutting, and eliminate bad chatter.
♦ A professional 5-edge design has been added, designed to exceed the productivity of 4-edge endmills.
| Workpiece Material | |||||
|
|
|
|
|
||
| 1234 | 5 | 123 | 123 | 123 | 4 |
| Carbon Steel,
Alloy Steel (＜35HRC) |
Alloy Steel,
Tool Steel (＜48HRC) |
Stainless Steel | Cast Iron | Heat-resistant Alloys | Titanium Alloys |
| ○ | ○ | ○ | ○ | ○ | ◎ |
◎ Most Suitable ○ Suitable
ST300 application case（Planet carrier）
| Specification | ST300-S4-12030 |
| Dimension | D12*C0.1*30*75*d12 |
| Material | 30CrMnSi(HB380) |
| Cutting speed | Vc=80m/min |
| Feed rate | fz =0.06mm/z |
| Cutting depth | ap=0.6mm，ae=7mm |
| Cooling method | emulsion |
| Cutting method | side milling |
